английский
немецкий
ˈcoun·ter·sunk ГЛ.
countersunk прич. прош. вр. от countersink
ˈcoun·ter·sink <-sank, -sunk> ГЛ. перех. usu passive
- to countersink sth [in sth] screw
-
ˈcoun·ter·sink <-sank, -sunk> ГЛ. перех. usu passive
- to countersink sth [in sth] screw
-
немецкий
английский
PONS OpenDict
Вы хотите добавить слова, фразы или переводы?
Пожалуйста, отправьте нам новый словарный запись для PONS OpenDict. Внесенные предложения проверяются редакцией PONS и соответствующим образом включаются в результаты.
Одноязычные примеры (не проверены редакцией PONS)
The basic geometry of a countersink (cutter) inherently can be applied to the plunging applications described above (axial feed only) and also to other milling applications (sideways traversal).
en.wikipedia.org The circle is shaped in a stamping press to create a downward countersink to fit snugly into the can body.
en.wikipedia.org The tapered drywall boards are used to countersink the tape in taped jointing whereas the tape in veneer plastering is buried beneath a level surface.
en.wikipedia.org Countersink cutters are manufactured with six common angles, which are 60, 82, 90, 100, 110, or 120, with the two most common of those being 82 and 90.
en.wikipedia.org Drill and countersink the holes.
www.stuff.co.nz Примеры из интернета (не проверены редакцией PONS)
[...]
www.hainbuch.com The position-oriented base end-stop of the »combi pull-back« and »combi deadlength« variants can be conveniently changed from the outside via three clamping screws countersunk in the chuck, and for standard chucks, provides excellent accuracy for face location combined with through-bore capacity.
[...][...]
Der lageorientierte Grundanschlag der »Kombi Axzug« und »Kombi Axfix« Variante lässt sich über drei im Futter versenkte Klemmschrauben bequem von außen wechseln und ermöglicht bei Standardfuttern Top-Planlauf gepaart mit vollem Durchgang.
[...][...]
www.heicko.de • The milling rips under the countersunk provide a clean countersinking of the screw s head into the wood and reduce the danger of getting cracks and gaps.
[...]
• Die Fräsrippen unter dem Senkkopf sorgen für ein sauberes Versenken des Schraubenkopfes im Holz und verringern die Gefahr einer Spalt- und Rissbildung.
[...]
www.swg.de Optimum countersinking with six cutting ribs.
[...]
Optimales Versenken mit sechs Fräsrippen.
[...]
www.schroeckenfux.at D2001, top countersunk, serrated, with stamping at right
[...][...]
D2001, oben versenkt, gezahnt, Ausnehm. rechts
[...][...]
www.schroeckenfux.at D2001, top countersunk, serrated, with stamping at left
[...][...]
D2001, oben versenkt, gezahnt, Ausnehm. links
[...]